Like the embroidery needle, the twin embroidery needle was developed specifically for embroidery threads, which are considerably more delicate than normal sewing thread. Thanks to its wider eye and wider scarf groove, the thread runs smoothly in every direction during decorative embroidery stitching, without thread breakage. This needle is also excellent for thicker threads.
Thanks to its medium ball points, the needle is especially gentle on materials, preventing damage to embroidery thread and fabric.
The twin embroidery needle is suitable for all common household sewing machines with a zigzag function.
Before sewing
Like other household needles, the twin embroidery needle is inserted into the needle bar with the flat side of the shank facing away from you. The needle plate and presser foot must have a recess large enough for the needle spacing and the selected stitch width.
Threading
Each of the two needles needs its own thread spool. If you don't have a second thread holder, use a bobbin for the second thread and place it below the spool holding the first thread. Make sure the bobbin and spool unwind in the same direction. You can use the same thread colour for both needles, or different colours for decorative effects.
Guide both needle threads together through your machine's thread guides as if they were one thread, then separate them and pass one thread through each needle eye. Some machines have a special way of separating the threads – if so, follow your machine's instruction manual.
Please note:
The automatic needle threader does not work with twin needles!
Tips
If your machine has a twin-needle mode or button, switch it on to limit the stitch width. This prevents the needle from hitting the needle plate and breaking.
Test the thread tension beforehand on some scrap fabric. Adjust the tension so the bobbin thread shows as a slight zigzag on the underside of the seam.
Sew a little more slowly over thick seam junctions to avoid needle breakage.
Do not push or pull the fabric while sewing – this can cause uneven stitch length and, in the worst case, needle breakage.
For a smooth, even seam you can apply spray starch before sewing, or use a water-soluble stabiliser while sewing.
Features:
CANU: 72:20, 72:30
Needle system(s): 130/705 H
Point type: SES/L BALL/FFG/J Ball/SIN/NYR/BPL – small ball point (for WOVENS, KNITS)
Coating: NICKEL-PLATED
Recommended for: embroidery
